| |
|
|
9600GPS receiver integrates antenna, receiving unit, collecting unit and power supply
together. The waterproof crust makes it fit for kinds of execrable environments. The integrative
design makes it very consistent and well--electromagnetism, and the simple operation is
convenient for surveying work.
Chapter I Introduction of Polaris 9600
9600GPS receiver integrates antenna, receiving unit, collecting unit and power supply
together. The waterproof crust makes it fit for kinds of execrable environments. The integrative
design makes it very consistent and well--electromagnetism, and the simple operation is
convenient for surveying work.
1. Antenna unit
Antenna is in the receiver, and the center frequency is 1575.42MHz.
2. Receiver unit
Receiver unit is composed of independent 12 channels. The data collected are L1 carrier
wave, C/A code fake distance and broadcast ephemeris.
3. Data collect unit
Data collect unit adopts 32 bits tiny director to calculate, it can make sure to enter the
orientation state quickly in kinds of condition and select the best observation satellite. A
receiver of 9600 is as fig 1-1.
Fig.1-1 photo of one receiver
B£® Main technical parameters of 9600 receiver
Channel: independent 12 channels, which can receive 12 satellites' signal at the same time.
Signal: L1 carrier wave, C/A code and broadcast ephemeris
Single orientation accuracy£º 15m
Data export: RS--232C COM port
Fixed means: it can be fixed on a pole or a tripod by use of base--plate.
Phase center: on the center point of receiver top
Operation environment temperature£º -20¡« +60¡æ
Storage environment temperature: -25¡«
+70¡æ
Power input: direct current 6V¡« 10V
Power: <1.8 W
Weight: 1.5 Kg |
|
|
