| |
|
|
|
Chapter III 9600 GPS Surveying System Files and Operation |
Chapter III 9600 GPS Surveying System Files and Operation
Chapter III 9600 GPS Surveying System Files and Operation
3.1 Brief introduction of 9600 survey files
3.1.1 Initialization interface
Turn on receiver, you will enter the initialization interface as following:
Chapter III 9600 GPS Surveying System Files and Operation
Chapter III 9600 GPS Surveying System Files and Operation
3.1 Brief introduction of 9600 survey files
3.1.1 Initialization interface
Turn on receiver, you will enter the initialization interface as following:
Fig 3-1 9600 initializtion interface of file system
1. mode select in initialization interface
There are three modes in the initialization interface, which are AUTO, MAN and LED. If you
don't make the selection, receiver will enter AUTO mode.
a. AUTO mode
It is a very intelligent collecting mode, the receiver can evaluate if the condition meets the
requirement and then auto enter the collection status. At the same time, you can see satellite
ephemeris and distributing.
b. MAN mode
This mode needs you to estimate if the collecting condition meets the requirement, which
asks for PDOP less than 6 and in the 3D status, you can input point name and period of time
number to enter the collecting state.
c. LED mode
At this state the LCD doesn't work, you can only estimate the collection state according to
indicator lights.
2. Indicator lights
Above the LCD screen, there are three indicator lights, which are power light, signal light
and satellite indicatory light from left to right.
If A-type battery is used, the power light will be green. If B-type battery is used, it will show
yellow. If two batteries are both not enough, the power light will be red.
When not in the 3D state, satellite light will twinkle red once after signal light twinkles red
many times, the times signal light twinkle is the visible number of satellites. When it enters 3D,
receiver will log data, the signal light will twinkle green many times and then satellite light will
twinkle green once, the time signal light twinkle is the collection time interval.
3.1.2 System interface
Select AUTO or MAN to enter main interface. See fig as follows.
9600 surveying system
9 |
|
|
